Honeywell GasLab Q2 User Manual

GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
Information for general use
Rev. M / 73023639
112
GasLab Q2
Figure 7.26: Time Service display overview
Depending on the user's authentication, the main display branches to the corresponding display
to change the system time. The hyperlink NTP overview is only displayed when time polling via
NTP is enabled in the enCore device.
The initial display of the T i m e S e r vi c e is the Main display. Access: System – Time Service
Figure 7.27: Time Service main display without/with NTP synchronization

Honeywell GasLab Q2 Specifications

General

Brand	Honeywell
Model	GasLab Q2
Category	Measuring Instruments
Language	English