GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
Information for general use
Rev. M / 73023639
7.3.13. System display (Audit trail)
The audit trail is another protocol archive for documentation.
It is part of the basic system and therefore available in all enCore device types.
The contents are displayed in the current device language.
As a result of the different types of archive data, a distinction is made between
“General” and “Fiscal
(Entries in the fiscal part of audit trail are only archived when the SSW is closed.)
It is possible to choose between “General”
and “Fiscal” in the left drop-down list.
The events recorded in the general audit
trail can be displayed more clearly using a
filter from the right-hand drop-down list.
Figure 7.35:
General audit trail display
You can choose between “All” (filter not used), “System”, “Parameter change” and “User login”.
In the fiscal audit trail, parameters can be
recorded which can also be changed
when the security switch (SSW) is closed.
Only if this switch is closed, will the
actions be recorded; in all other cases, the
archive will be empty. This archive is
primarily relevant for billing purposes.
Figure 7.36:
Fiscal audit trail display
Activating the hyperlink next to the entry
enables the user to view details of the
entry in a new display. See example.
Details of the change include the date
and time, old/new value or the user who
made the change.
Figure 7.37:
Example of audit trail details
To Next Page
Loading...
Need help?
General
