CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Information for general use
Rev. M / 73023639
8.3. User management and login
Like all enCore devices, the GasLab Q2 has a user management system. In principle, a parameter
can only be changed and used in the device if the user is entitled to do this and the position of the
security switch (SSW) allows it.
In the delivery state, the preset standard login works for all users without password.
The administrator should therefore first determine the authorizations and passwords.
Dans l'état de livraison, la connexion standard prédéfinie fonctionne pour tous les
utilisateurs sans mot de passe. L'administrateur doit donc d'abord déterminer les
autorisations et les mots de passe.
8.3.2 Assigning or changing a password using online parameterization
EnCore devices differentiate between rights at parameter level and at system level. Rights at
parameter level can be assigned in a differentiated way for individual parameters or parameter areas
of an application.
Rights at system level determine which system settings of the device may be changed. This includes,
for example, changing the device time.
Details of the user management system are available
in the Docuthek (www.docuthek.com) under
“enCore ZM1, BM1, MC1, FC1 – basic system with SFBs” and in the online help.
Various situations are explained in the following use cases.
For working on protected settings, a login prompt will automatically appear when you start the
action. To log in, you will require a user name and password which the system operator, acting as
the administrator, or the super user of the profile will have prepared for you. Please request these
data.
Figure 8.17: Login dialog window
To Next Page
Loading...
Need help?
General
