Information for general use
Rev. M / 73023639
1. About this document
1.1. Aim / Scope
This document informs about the worldwide applicable Honeywell ® GasLab Q2 hereinafter called
short Q2. It is a real-time natural gas analyzer from the enCore instrument series and measures the
superior calorific value, Wobbe index and other parameters in natural gas and is designed for
operation in many potentially explosive atmospheres. GasLab Q2 covers a wide operating
temperature range, this allows the analyzer to be placed close to the process to obtain a short
response time.
Common applications are control and regulation of gas tubins, fiscal energy measurement and
analysis of gas mixtures. To do so the Q2 uses the configuration and analysis software enSuite.
(Software details see chapter 8 Configuration and analysis software enSuite).
Please note that only the software and hardware versions mentioned on the
cover page are described here.
This document is intended for trained personnel in the gas industry or process measuring sector.
It explains the basic instrument functions and describes the installation, commissioning, operation,
use and maintenance. In addition to the general specialist knowledge, this document enables safe
and efficient use of the GasLab Q2. To do so, you must have a good command of the documentation
language or use another translation of this manual.
The safety and warning instructions on the device are in English or French.
Depending on the area of activity, trained personnel are assumed to have various basic
skills; the pertinent details are contained in the relevant sections.
Selon le domaine d’activité, diverses compétences de base sont nécessaires. Les
informations correspondantes se trouvent dans les chapitres respectifs.
Definitions used in this document; Définitions utilisées dans ce document;
1.3 Symbols, abbreviations and definitions
Compliance with all the safety information and instructions set out in this information is a
requirement for safe working practice and correct handling of the device and for correct
measurement and calculation results.
Furthermore, the directives, standards, local accident prevention regulations and general safety
regulations which apply to the field of application of the device, must be obeyed.
If you have any questions, any points in this information for gereral use are unclear or you require
repair work, Honeywell will be delighted to help. The contact details are provided at the start of this
document.
To Next Page
Loading...
