8.6.8. Use “Live data tab” to view the Software status
In most enCore devices, a display called “Software status” shows information about the
identification data of all the software parts in the device. The data comprise the name of the software
parts, the version number and the checksum. These data can also be displayed using enSuite
functions “Software configuration” and “Live data”.
Use the “Software configuration” tab to display the software status.
Figure 8.56: Software configuration info
The software configuration lists the names of the main software parts in the column headed
Software module. The next column Current contains the software version numbers of the
components.
The second line of the tab shows the short name of an approval file. This file contains the definition
of which parameters should be protected from changes so that the device can be operated to the
customer’s specification or approval (further information about the approval file is provided in
section 8.4.10 Fiscal parameters and optional using approval file (Select approval)).
To Next Page
Loading...
