GASLAB Q2 DISPLAYS (OPERATE THE DEVICE) 
Information for general use 
Rev. M / 73023639 
 
The following values can be found in the sub-display Details of the main display: 
 
Displayed value 
(abbreviation) 
Meaning (of the value abbreviation)/Physical quantity 
Superior calorific value; molar  
Superior calorific value; based on volume  
Superior calorific value; based on mass  
Inferior calorific value; molar  
Inferior calorific value; based on volume 
Inferior calorific value; based on mass 
Compressibility factor at basis conditions  
Density at base conditions   
Molar mass (of the mixture)  
To see all the calculations, you must once again use the superimposition keys as the 
display is too long to be shown in full. 
You can only change to the details of another standard using the main display.