4. Select OK and press Enter to continue.
5. From the main menu, select Maintain Firmware and press Enter.
Figure 45 EBSU Main Menu
6. In the Maintain Firmware screen, use the tab key to scroll down to the Device section.
7. Use the down arrow key to scroll down to the Smart Array Controller item in the list.
8. Press Enter to display detailed information about the device.
Figure 46 EBSU Maintain Firmware Screen
EBSU displays the firmware update screen for the selected device.
• The version number in the first column (ROM Firmware Version) is the one currently
installed on your system.
• The version number in the second column (ROM Version on Disk) is the one available on
your Smart Setup media.
Core I/O Card Configuration 109
To Next Page
Loading...
