To Next Page

To Previous Page

11-17

Port-Based Virtual LANs (VLANs) and GVRP

Port-Based Virtual LANs (Static VLANs)

Displaying the Configuration for a Particular VLAN . This command

uses the VID to identify and display the data for a specific static or dynamic

VLAN.

Syntax: show vlan <vlan-id>

Figure 11-13. Example of “Show VLAN” for a Specific Static VLAN

Figure 11-14. Example of “Show VLAN” for a Specific Dynamic VLAN

Show VLAN lists this

data when GVRP is

enabled and at least

one port on the switch

has dynamically

joined the designated

VLAN.

!Software.book Page 17 Thursday, October 10, 2002 6:10 PM

Other manuals for HP ProCurve 2650

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2650 and is the answer not in the manual?

General