To Next Page

To Previous Page

11-19

Port-Based Virtual LANs (VLANs) and GVRP

Port-Based Virtual LANs (Static VLANs)

Creating a New Static VLAN

Changing the VLAN Context Level.

With this command, entering a new VID creates a new static VLAN. Entering

the VID or name of an existing static VLAN places you in the context level for

that VLAN.

Syntax: vlan <vlan-id> [name <name-str>] Creates a new static VLAN if a

VLAN with that VID does not

already exist, and places you in

that VLAN’s context level. If you

do not use the name option, the

switch uses “VLAN” and the new

VID to automatically name the

VLAN.

If the VLAN already exists, the

switch places you in the context

level for that VLAN.

vlan <vlan-name> Places you in the context level

for that static VLAN.

For example, to create a new static VLAN with a VID of 100:

Figure 11-16. Example of Creating a New Static VLAN

To go to a different VLAN context level, such as to the default VLAN:

HPswitch(vlan-100)# vlan default_vlan

HPswitch(vlan-1) _

Creating the new VLAN.

Showing the result.

!Software.book Page 19 Thursday, October 10, 2002 6:10 PM

Other manuals for HP ProCurve 2650

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2650 and is the answer not in the manual?

General