HP ProCurve 2650 User Manual

13-21
802.1w Rapid Spanning Tree Protocol (RSTP) and 802.1d Spanning Tree Protocol (STP)
802.1p Spanning-Tree Protocol (STP)
Figure 13-7. The Configuration Menu Indicating a Reboot Is Needed to Implement a
Configuration Change
11. Press to return to the Main menu.
Figure 13-8. The Main Menu Indicating a Reboot Is Needed To Implement a
Configuration Change
12. Press to reboot the switch. This implements the Protocol Version
change (steps 2 and 3 on page 13-19).
!Software.book Page 21 Thursday, October 10, 2002 6:10 PM

HP ProCurve 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	2
Jumbo Frame Support	Yes
Form Factor	Rack-mountable
VLAN Support	Yes
Layer 3 Routing	No
PoE Support	No
Fanless	No
Altitude	Up to 3, 000 meters
Management	CLI, SNMP
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	15% to 95% non-condensing