HP ProCurve 2650

14-27
HP Procurve Stack Management
Configuring Stack Management
You will then see the Commander’s Stacking Status screen:
Figure 14-19. Example of the Commander’s Stacking Status Screen
Viewing Member Status. This procedure displays the Member’s stacking
information plus the Commander’s status, IP address, and MAC address.
To display the status for a Member:
1. Go to the console Main Menu of the Commander switch and select
9. Stacking ...
5. Stack Access
2. Use the down arrow key to select the Member switch whose status you
want to view, then press (for
eXecute). You will then see the Main Menu
for the selected Member switch.
3. In the Member’s Main Menu screen, select
9. Stacking ...
1. Stacking Status (This Switch)
You will then see the Member’s Stacking Status screen:
!Software.book Page 27 Thursday, October 10, 2002 6:10 PM