14-32
HP Procurve Stack Management
Configuring Stack Management
Viewing the Status of all Stack-Enabled Switches Discovered in the IP
Subnet. The next example lists all the stack-configured switches discovered
in the IP subnet. Because the Switch 2650 or Switch 6108 on which the show
stack all command was executed is a candidate, it is included in the “Others”
category.
Syntax: show stack all
Figure 14-24. Result of Using the Show Stack All Command To List Discovered Switches in the IP Subnet
Viewing the Status of the Commander and Current Members of the
Commander’s Stack. The next example lists all switches in the stack of the
selected switch.
Syntax: show stack view
Figure 14-25. Example of the Show Stack View Command To List the Stack
Assigned to the Selected Commander
!Software.book Page 32 Thursday, October 10, 2002 6:10 PM
To Next Page
Loading...
