HP V1910 User Manual

1
Overview
The HP V1910 Switch Series can be configured through the command line interface (CLI), web interface,
and SNMP/MIB. These configuration methods are suitable for different application scenarios.
 The web interface supports all V1910 Switch Series configurations.
 The CLI provides some configuration commands to facilitate your operation. To perform other
configurations not supported by the CLI, use the web interface.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP