HP V1910 User Manual

229
Item Descri
p
tion
DOT3 TLV
Setting
Link Aggregation
Select to include the link aggregation TLV in transmitted
LLDPDUs.
MAC/PHY
Configuration/Status
Select to include the MAC/PHY configuration/status TLV in
transmitted LLDPDUs.
Maximum Frame Size
Select to include the maximum frame size TLV in transmitted
LLDPDUs.
Power via MDI Select to include the power via MDI TLV in transmitted LLDPDUs.
MED TLV
Setting
LLDP-MED Capabilities
Select to include the LLDP-MED capabilities TLV in transmitted
LLDPDUs.
Inventory
Select to include the hardware revision TLV, firmware revision
TLV, software revision TLV, serial number TLV, manufacturer
name TLV, model name TLV and asset ID TLV in transmitted
LLDPDUs.
Network Policy Select to include the network policy TLV in transmitted LLDPDUs.
Extended Power-via-MDI
Capability
Select to include the extended power-via-MDI TLV in transmitted
LLDPDUs.
Emergency Number
Select to encode the emergency call number in the location
identification TLV in transmitted LLDPDUs and set the emergency
call number.
Address
Select Address to encode the civic address information of the
network connectivity device in the location identification TLV in
transmitted LLDPDUs. In addition, set the device type, which can
be a DHCP server, switch or LLDP-MED endpoint, country code,
and network device address.
When configuring the network device address, select the
address information type from the drop-down list, type the
address information in the text box below and click Add next to
the text box to add the information to the address information
list below. To remove an address information entry, select the
entry from the list, and click Delete. The civic address
information can include language, province/state, country,
city, street, house number, name, postal/zip code, room
number, post office box, and if necessary, additional
information.
Network Device Address
Return to LLDP configuration task list.
Configuring global LLDP setup
Select Network  LLDP from the navigation tree and click the Global Setup tab to enter the page shown in
a.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP