HP V1910 User Manual

330
802.1X configuration task list
1. 802.1X configuration task list
Task Descri
p
tion
Configuring 802.1X globally
Required
Enable 802.1X authentication globally and configure the
authentication method and advanced parameters.
By default, 802.1X authentication is disabled globally.
Error! Reference source not
found.
Required
Enable 802.1X authentication on specified ports and configure
802.1X parameters for the ports.
By default, 802.1X authentication is disabled on a port.
Configuring 802.1X globally
From the navigation tree, select Authentication  802.1X to enter the 802.1X configuration page. In the
802.1X Configuration area, you can view and configure the 802.1X feature globally.
a. 802.1X configuration page
2. Basic 802.1X configuration items
Item Descri
p
tion
Enable 802.1X Enable or disable 802.1X authentication globally.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP