HP V1910 User Manual

354
2.
ISP domain configuration items
Item Descri
p
tion
Domain Name
Type the ISP domain name, which is for identifying the domain.
You can type a new domain name to create a domain, or specify an existing domain
to change its status (whether it is the default domain).
Default Domain
Specify whether to use the ISP domain as the default domain.
 Enable: Uses the domain as the default domain.
 Disable: Uses the domain as a non-default domain.
There can only be one default domain at a time. If you specify a second domain as
the default domain, the original default domain becomes a non-default domain.
Return to Configuration task list.
Configuring authentication methods for the ISP domain
Select Authentication  AAA from the navigation tree and then select the Authentication tab to enter the
authentication method configuration page, as shown in a.
a. Authentication method configuration page
2. Authentication method configuration items
Item Descri
p
tion
Select an ISP
domain
Select the ISP domain for which you want to specify authentication methods.
Default AuthN
Configure the default authentication method and secondary authentication method for all
types of users.
Options include:
 Local—Performs local authentication.
 None—All users are trusted and no authentication is performed. Generally, this
mode is not recommended.
 RADIUS—Performs RADIUS authentication. You must specify the RADIUS scheme to
be used.
 Not Set—Restore the default, that is, local authentication.
Name
Secondary Method

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP