HP V1910 User Manual

75
Configuring local port mirroring
Configuration task list
Configuring local port mirroring
To configure local port mirroring, you must create a local mirroring group and then specify the mirroring
ports and monitor port for the group.
1. Local port mirroring configuration task list
Task Remarks
Create a local mirroring group
Required
For more information, see “Creating a mirroring group”.
Configure the mirroring ports
Required
For more information, see “Configuring ports for a mirroring group”.
During configuration, you need to select the port type Mirror Port. You
can configure multiple mirroring ports for a mirroring group.
Configure the monitor port
Required
For more information, see “Configuring ports for a mirroring group”.
During configuration, you need to select the port type Monitor Port. You
can configure one only monitor port for a mirroring group.
Creating a mirroring group
Select Device  Port Mirroring from the navigation tree and click Create to enter the page for creating a
mirroring group, as shown in a.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP