HP V1910 User Manual

358
Item Descri
p
tion
Secondary
Method
 None—Performs no accounting.
 RADIUS—Performs RADIUS accounting. You must specify the RADIUS scheme to be
used.
 Not Set—Uses the default accounting methods.
Return to Configuration task list.
AAA configuration example
Network requirements
As shown in a, configure the switch to perform local authentication, authorization, and accounting for
Telnet users.
a. Network diagram for AAA configuration example
Configuration procedure
NOTE:
Enable the Telnet server function on the switch and configure the switch to use AAA for Telnet users. The
configuration steps are omitted.
# Configure IP addresses for the interfaces. (Omitted)
# Configure a local user.
 Select Device  Users from the navigation tree and then select the Create tab, as shown in a.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP