HP V1910 User Manual

359
a.
Configure a local user
 Enter telnet as the username.
 Select Management as the access level.
 Enter abcd as the password.
 Enter abcd to confirm the password.
 Select Telnet Service as the service type.
 Click Apply.
# Configure ISP domain test.
 Select Authentication  AAA from the navigation tree. The domain configuration page appears, as
shown in b.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP