HP V1910 User Manual

360
b.
Configure ISP domain test
 Enter test as the domain name.
 Click Apply.
# Configure the ISP domain to use local authentication.
 Select Authentication  AAA from the navigation tree and then select the Authentication tab, as shown
in c.
c. Configure the ISP domain to use local authentication
 Select the domain test.
 Select the Login AuthN check box and select the authentication method Local.
 Click Apply. A configuration progress dialog box appears, as shown in d.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP