HP V1910 User Manual

444
a.
The page for configuring line rate on a port
2 describes the configuration items of configuring line rate on a port.
2. Configuration items of configuring line rate on a port
Item Descri
p
tion
Please select an interface type
Select the types of interfaces to be configured with line rate.
The interface types available for selection depend on your device
model.
Rate Limit Enable or disable line rate on the specified port.
Direction
Select a direction in which the line rate is to be applied.
 Inbound—Limits the rate of packets received on the specified port.
 Outbound—Limits the rate of packets sent by the specified port.
 Both—Limits the rate of packets received on and sent by the
specified port.
CIR Set the committed information rate (CIR), the average traffic rate.
Please select port(s)
Specify the ports to be configured with line rate
Click the ports to be configured with line rate in the port list. You can
select one or more ports.
Return to Line rate configuration task list.
Configuring priority mapping tables
Select QoS  Priority Mapping from the navigation tree to enter the page shown in a.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP