HP V1910 User Manual

119
Item Descri
p
tion
Contact
Set a character string to describe the contact information for system
maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to the contact information of the device.
Location Set a character string to describe the physical location of the device.
SNMP Version Set the SNMP version run by the system
Return to SNMPv1 or SNMPv2c configuration task list or SNMPv3 configuration task list.
Configuring an SNMP view
Select Device  SNMP from the navigation tree, and then click the View tab to enter the page as shown in
a.
a. View page
Creating an SNMP view
Table 23 Click Add, the Add View window appears as shown in b.
Table 24 Type the view name and click Apply, and then you enter the page as shown in c.
b. Create an SNMP view (1)

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP