HP V1910 User Manual

224
Task Remarks
Displaying global LLDP
information
Optional
You can display the local global LLDP information and statistics.
Displaying LLDP
information received from
LLDP neighbors
Optional
You can display the LLDP information received from LLDP neighbors.
NOTE:
LLDP-related configurations made in Ethernet interface view takes effect only on the current port, and those
made in port group view takes effect on all ports in the current port group.
Enabling LLDP on ports
Select Network  LLDP from the navigation tree to enter the Port Setup tab, as shown in a.
This tab displays the LLDP status and operating mode on a port. Select one or more ports and click Enable
beneath the port list to enable LLDP on them.
To disable LLDP on a port, select the port and click Disable.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP