60
Item Descri
tion
File Type
Specifies the type of the startup configuration file:
Main
Backup
If a file with same name
already exists, overwrite
it without prompt.
Specifies whether to overwrite the file with the same name.
If you do not select the option, when a file with the same name exists, a dialog box
appears, telling you that the file already exists and you cannot continue the
upgrade.
Reboot after the
upgrading finished.
Specifies whether to reboot the device to make the upgraded system software
image file take effect after the system software image file is uploaded.
Device reboot
CAUTION:
Before rebootin
the device, save the confi
uration; otherwise, all unsaved confi
uration will be lost
after device reboot.
When the device reboots, you need to re-log in to the web interface.
Select Device Device Maintenance from the navigation tree, click the Reboot tab to enter the device
reboot configuration page, as shown in a.
a. Device reboot page
Click Apply to reboot the device. You can check whether the current configuration has been saved to the
startup configuration file.
If you select Check configuration with next startup configuration file, the system checks the
configuration before rebooting the device. If the check succeeds, the system reboots the device; if the
check fails, a dialog box appears, telling you that the current configuration and the saved
configuration are inconsistent, and the device will not be rebooted. In this case, you need to save the
current configuration manually before you can reboot the device.
If you do not select the check box, the system reboots the device directly.
To Next Page
Loading...
Need help?
General
