i.
Configure the AAA accounting method for the ISP domain
Select the domain name test.
Select the Accounting Optional checkbox and then select Enable.
Select the Default Accounting checkbox and then select RADIUS as the accounting mode.
Select system from the Name drop-down list to use it as the accounting scheme.
Click Apply. A configuration progress dialog box appears.
After the configuration process is complete, click Close.
Configuration guidelines
When you configure the RADIUS client, note the following guidelines:
When you modify the parameters of the RADIUS scheme, the system does not check whether the
scheme is being used by users.
After accounting starts, update-accounting and stop-accounting packets will be sent to the designated
server, and no primary/secondary server switchover will take place even if the designated server fails.
Such a switchover can take place only during AAA session establishment.
If an AAA server has active TCP connections, it cannot be removed.
RADIUS does not support accounting for FTP users.
If the CAMS/iMC server is used as the RADIUS server, it is necessary to configure accounting as
optional for users in the ISP domain because the CAMS/iMC server does not respond to accounting
packets.
To Next Page
Loading...
Need help?
General
