HP V1910 User Manual

406
Authorized IP configuration
Overview
The authorized IP function is to associate the HTTP or Telnet service with an ACL to filter the requests of
clients. Only the clients that pass the ACL filtering can access the device.
Configuring authorized IP
Select Security  Authorized IP from the navigation tree, and then click the Setup tab to enter the authorized
IP configuration page, as shown in a.
a. Authorized IP configuration page
2. Authorized IP configuration items
Item Descri
p
tion
Telnet
IPv4 ACL
Associate the Telnet service with an IPv4 ACL.
You can configure the IPv4 ACL to be selected by selecting QoS

ACL IPv4.
IPv6 ACL( Not
Supported )
Associate the Telnet service with an IPv6 ACL.
You can configure the IPv6 ACL to be selected by selecting QoS

ACL IPv6.
Web
(HTTP)
IPv4 ACL
Associate the HTTP service with an IPv4 ACL.
You can configure the IPv4 ACL to be selected by selecting QoS

ACL IPv4.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP