HP V1910 User Manual

20
Table 9 Click the Settings tab, set the emulation to VT100, and click OK in the Switch Properties dialog box.
f. Set terminal emulation in Switch Properties dialog box
Logging in to the CLI
The login process requires a username and password. The default username for first time configuration is
admin, no password is required. Usernames and passwords are case sensitive.
To log in to the CLI:
Table 10 Press Enter. The Username prompt displays:
Login authentication
Username:
Table 11 Enter your username at the Username prompt.
Username:admin
Table 12 Press Enter. The Password prompt display
Password:
The login information is verified, and displays the following CLI menu:
<HP V1910 Switch>
If the password is invalid, the following message appears and process restarts.
% Login failed!

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP