HP V1910 - Configuring MSTP on a Port

194
Item Descri
p
tion
TC Protection
Enable or disable TC-BPDU guard.
When receiving topology change (TC) BPDUs, the device flushes its forwarding
address entries. If someone forges TC-BPDUs to attack the device, the device will
receive a large number of TC-BPDUs within a short time and frequently flushes its
forwarding address entries. This affects network stability.
With the TC-BPDU guard function, you can prevent frequent flushing of forwarding
address entries.
IMPORTANT:
HP does not recommend you to disable this function.
TC Protection Threshold
Set the maximum number of immediate forwarding address entry flushes the device
can perform within a certain period of time after receiving the first TC-BPDU.
Return to MSTP configuration task list.
Configuring MSTP on a port
Select Network  MSTP from the navigation tree, and click the Port Setup tab to enter the page shown in
a.
a. MSTP configuration on a port
2. Configuration items of configuring MSTP on a port
Item Descri
p
tion
STP Enable or disable STP on the port.