HP V1910 User Manual

281
Task Remarks
Configuring and displaying clients'
IP-to-MAC bindings
Optional
Create a static IP-to-MAC binding, and view static and dynamic
bindings.
The DHCP relay agent can dynamically record clients’ IP-to-MAC
bindings after clients get IP addresses. It also supports static bindings,
that is, you can manually configure IP-to-MAC bindings on the DHCP
relay agent, so that users can access external network using fixed IP
addresses.
By default, no static binding is created.
Enabling DHCP and configuring advanced
parameters for the DHCP relay agent
Select Network  DHCP from the navigation tree to enter the default DHCP Relay page. Enable or disable
DHCP in the DHCP Service field. Click Display Advanced Configuration to expand the advanced DHCP
relay agent configuration field, as shown in a.
a. DHCP relay agent configuration page

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP