HP V1910 User Manual

46
Device basic information configuration
The device basic information feature provides the following functions:
 Set the system name of the device. The configured system name is displayed on the top of the
navigation bar.
 Set the idle timeout period for logged-in users. The system logs an idle user off the web for security
purpose after the configured period.
Configuring device basic information
Configuring system name
Select Device  Basic from the navigation tree to enter the system name configuration page, as shown in a.
a. Configure system name
2. System name configuration item
Item Descri
p
tion
Sysname Set the system name.
Configuring idle timeout period
Select Device  Basic from the navigation tree, and then click the Web Idle Timeout tab to enter the page
for configuring idle timeout period, as shown in a.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP