HP V1910 User Manual

255
Task Remarks
Configuring IGMP snooping
in a VLAN
Required
Enable IGMP snooping in the VLAN and configure the IGMP snooping version
and querier feature.
By default, IGMP snooping is disabled in a VLAN.
IMPORTANT:
 IGMP snooping must be enabled globally before it can be enabled in a
VLAN.
 When you enable IGMP snooping in a VLAN, this function takes effect for
ports in this VLAN only.
Configuring IGMP snooping
port functions
Optional
Configure the maximum number of multicast groups allowed and the fast leave
function for ports in the specified VLAN.
IMPORTANT:
 IGMP snooping must be enabled globally before IGMP snooping can be
enabled on a port.
 IGMP snooping configured on a port takes effect only after IGMP snooping
is enabled in the VLAN.
Display IGMP snooping
multicast entry information
Optional
Enabling IGMP snooping globally
Select Network  IGMP Snooping in the navigation tree to enter the basic configuration page shown in a.
a. Basic IGMP snooping configurations

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP