HP V1910 User Manual

445
a.
The page for configuring priority mapping tables
2 describes the configuration items of configuring priority mapping tables.
2. Configuration items of configuring priority mapping tables
Item Descri
p
tion
Mapping Type
Select the priority mapping table to be configured, which can be CoS
to DSCP, CoS to Queue, DSCP to CoS, DSCP to DSCP, or DSCP to
Queue. For example, select DSCP to DSCP mapping type to enter the
page shown in 2.
Input Priority Value
Set the output priority value for an input priority value.
Output Priority Value
Restore
Click Restore to display the default settings of the current priority
mapping table on the page.
To restore the priority mapping table to the default, click Apply.
a. The page for configuring DSCP to DSCP mapping table
Return to Priority mapping table configuration task list.
Configuring priority trust mode on a port
Select QoS  Port Priority from the navigation tree to enter the page shown in a. Click the icon
corresponding to a port to enter the page shown in b.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP