HP V1910 User Manual

211
Displaying information of an aggregate interface
Select Network  Link Aggregation from the navigation tree. The Summary tab is displayed by default, as
shown in a.
a. Display information of an aggregate interface
2. Fields on the Summary tab
Field Descri
p
tion
Aggregation interface
Type and ID of the aggregate interface.
Bridge-Aggregation indicates a Layer 2 aggregate interface.
Link Type Type of the aggregate interface, which can be static or dynamic.
Partner ID ID of the remote device, including its LACP priority and MAC address.
Selected Ports
Number of Selected ports in each link aggregation group. Only Selected ports
can transmit and receive user data.
Standby Ports
Number of Unselected ports in each link aggregation group. Unselected ports
cannot transmit or receive user data.
Return to Static aggregation group configuration task list.
Return to Dynamic aggregation group configuration task list.
Setting LACP priority
Select Network  LACP from the navigation tree, and click the Setup tab to enter the page shown in a.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP