EasyManuals Logo

HP V1910 User Manual

HP V1910
483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
156
Configuring voice VLAN on a port in automatic voice VLAN assignment mode
Perform the tasks described in 1 to configure the voice VLAN function on a port working in automatic voice
VLAN assignment mode.
1. Voice VLAN configuration task list for a port in automatic voice VLAN assignment mode
Task Remarks
Configuring voice VLAN globally
Optional
Configure the voice VLAN to operate in security mode and
configure the aging timer.
Configuring voice VLAN on a port
Required
Configure the voice VLAN assignment mode of a port as
automatic and enable the voice VLAN function on the port.
By default, the voice VLAN assignment mode of a port is
automatic, and the voice VLAN function is disabled on a port.
Adding OUI addresses to the OUI list
Optional
You can configure up to 16 OUI addresses.
By default, the system is configured with seven OUI addresses,
as shown in 1.
Configuring voice VLAN on a port working in manual voice VLAN assignment mode
Perform the tasks described in 1 to configure the voice VLAN function on a port working in manual voice
VLAN assignment mode.
1. Configuration task list for a port in manual voice VLAN assignment mode
Task Remarks
Configuring voice VLAN globally
Optional
Configure the voice VLAN to operate in security mode and
configure the aging timer.
Assigning the port to the voice VLAN
Required
After an access port is assigned to the voice VLAN, the voice
VLAN automatically becomes the PVID of the access port.
For more information, see the chapter “VLAN configuration”.
Configuring the voice VLAN as the PVID of
a hybrid or trunk port
Optional
This task is required if the incoming voice traffic is untagged and
the link type of the receiving port is trunk or hybrid. If the
incoming voice traffic is tagged, do not perform this task.
For more information, see the chapter “Port management
configuration”.
Configuring voice VLAN on a port
Required
Configure the voice VLAN assignment mode of a port as manual
and enable the voice VLAN function on the port.
By default, the voice VLAN assignment mode of a port is
automatic, and the voice VLAN function is disabled on a port.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP V1910 and is the answer not in the manual?

HP V1910 Specifications

General IconGeneral
Switching Capacity56 Gbps
Forwarding Rate41.7 Mpps
ManageableYes
Form FactorRack-mountable
FeaturesVLAN, QoS, Link Aggregation
Operating Temperature0°C to 45°C
Operating Humidity10% to 90% (non-condensing)
Ports24 x 10/100/1000 + 4 x SFP

Related product manuals