HP V1910 - Page 276

264
 Click Apply to complete the operation.
# Enable the fast leave function for GigabitEthernet 1/0/3.
 Click the Advanced tab.
f. Configure IGMP snooping on GigabitEthernet 1/0/3
 Select GigabitEthernet 1/0/3 from the Port drop-down list.
 Type the VLAN ID 100.
 Select the Enable radio button for Fast Leave.
 Click Apply to complete the operation.
Configuration verification
# Display the IGMP snooping multicast entry information on Switch A.
 Select Network  IGMP Snooping in the navigation tree to enter the basic configuration page.
 Click the plus sign (+) in front of Show Entries in the basic VLAN configuration page to display
information about IGMP snooping multicast entries, as shown in a.
a. IGMP snooping multicast entry information displaying page
 Click the icon corresponding to the multicast entry (0.0.0.0, 224.1.1.1) to view information about
this entry, as shown in b.