HP V1910 User Manual

18
b. Connection description of the HyperTerminal
Table 6 Select the serial port to be used from the Connect using drop-down list, and click OK.
c. Set the serial port used by the HyperTerminal connection
Table 7 Set Bits per second to 38400, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to
None, and click OK.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP