HP V1910 User Manual

297
b.
Configure DHCP snooping functions on GigabitEthernet 1/0/1
 Click on the Trust radio button next to Interface State.
 Click Apply.
# Configure DHCP snooping functions on GigabitEthernet 1/0/2.
 Click the
icon of GigabitEthernet 1/0/2 on the interface list. Perform the following operations on
the DHCP Snooping Interface Configuration page shown in c.
c. Configure DHCP snooping functions on GigabitEthernet 1/0/2
 Click on the Untrust radio button for Interface State.
 Click on the Enable radio button next to Option 82 Support.
 Select Replace for Option 82 Strategy.
 Click Apply.
# Configure DHCP snooping functions on GigabitEthernet 1/0/3.
 Click the
icon of GigabitEthernet 1/0/3 on the interface list. Perform the following operations on
the DHCP Snooping Interface Configuration page shown in d.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP