HP V1910 User Manual

310
a.
Network diagram for configuring static ARP entries
Configuration procedure
# Create VLAN 100.
 Select Network  VLAN from the navigation tree, click the Add tab, and then perform the following
operations, as shown in a.
a. Create VLAN 100
 Type 100 for VLAN ID.
 Click Create to complete the configuration.
# Add GigabitEthernet 1/0/1 to VLAN 100.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP