312
# Create VLAN-interface 100.
Select Network VLAN Interface from the navigation tree, click the Create tab, and then perform the
following operations, as shown in d.
d. Create VLAN-interface 100
Type 100 for VLAN ID.
Select the Configure Primary IPv4 Address checkbox.
Click on the Manual radio botton.
Type 192.168.1.2 for IPv4 Address.
Select 24 (255.255.255.0) for Mask Length.
Click Apply to complete the configuration.
# Create a static ARP entry.
Select Network ARP Management from the navigation tree to enter the default ARP Table page.
Click Add Perform the following operations, as shown in e.
To Next Page
Loading...
