HP V1910 User Manual

318
NOTE:
If both the ARP detection based on specified objects and the ARP detection based on static IP-to-MAC
bindings/DHCP snooping entries/802.1X security entries are enabled, the former one applies first, and
then the latter applies.
Select Network  ARP Anti-Attack from the navigation tree to enter the default ARP Detection page shown
in a.
a. ARP Detection configuration page
2. ARP Detection configuration items
Item Descri
p
tion
VLAN Settings
Select VLANs on which ARP detection is to be enabled.
To add VLANs to the Enabled VLAN list box, select one or multiple VLANs from the Disabled
VLAN list box and click the << button.
To remove VLANs from the Enabled VLAN list box, select one or multiple VLANs from the list
box and click the >> button.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP