HP V1910 User Manual

333
a.
802.1X configuration on a port
2. Port 802.1X configuration items
Item Descri
p
tion
Port
Select the port to be enabled with 802.1X authentication. Only 802.1X-disabled
ports are available.
IMPORTANT:
 If the PVID of a port is the same as a voice VLAN, the 802.1X function cannot
take effect on the port.
 802.1X is mutually exclusive with link aggregation configuration on a port.
Port Control
Select the access control method for the port, which can be MAC Based or Port
Based.
Port Authorization
Select the port authorization state for 802.1X.
Options include:
 Auto—Places the port initially in the unauthorized state to allow only EAPOL
packets to pass, and after a user passes authentication, sets the port in the
authorized state to allow access to the network. You can use this option in
most scenarios.
 Force-Authorized—Places the port in the authorized state, enabling users on
the port to access the network without authentication.
 Force-Unauthorized—Places the port in the unauthorized state, denying any
access requests from users on the port.
Max Number of Users Set the maximum number of concurrent 802.1X users on the port.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP