HP V1910 User Manual

362
f.
Configure the ISP domain to use local accounting
 Select the domain test.
 Select the Login Accounting check box and select the accounting method Local.
 Click Apply. A configuration progress dialog box appears.
 After the configuration process is complete, click Close.
Now, if you telnet to the switch and enter username telnet@test and password abcd, you should be serviced
as a user in domain test.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP