HP V1910 - QoS configuration task lists; Configuring a QoS policy

420
a.
The page for configuring a rule for an Ethernet frame header ACL
2 describes the configuration items for creating a rule for an Ethernet frame header IPv4 ACL.
2. Configuration items for an Ethernet frame header IPv4 ACL rule
Item Descri
p
tion
Select Access Control List (ACL)
Select the Ethernet frame header IPv4 ACL for which you want to configure
rules.
Available ACLs are Ethernet frame header IPv4 ACLs that have been
configured.
Rule ID
Select the Rule ID option and type a number for the rule.
If you do not specify the rule number, the system will assign one
automatically.
Operation
Select the operation to be performed for packets matching the rule.
 Permit—Allows matched packets to pass.
 Deny—Drops matched packets.
MAC
Address
Filter
Source MAC
Address
Select the Source MAC Address option and type a source MAC address and
a mask.
Source Mask
Destination MAC
Address
Select the Destination MAC Address option and type a destination MAC
address and a mask.