HP V1910 User Manual

41
Now, switch B becomes a member switch.
# On Switch C, configure local port GigabitEthernet 1/0/1 connecting with Switch B as a stack port.
 Select IRF from the navigation tree of Switch C to enter the page of the Setup tabe.
e. Configure a stack port on Switch C
 In the Port Settings area, select the check box before GigabitEthernet1/0/1.
 Click Enable.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP