HP V1910 User Manual

80
b. Configure the mirroring ports
 Select 1 – Local in the Mirroring Group ID drop-down list.
 Select Mirror Port in the Port Type drop-down list.
 Select both in the Stream Orientation drop-down list.
 Select GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 on the chassis front panel.
 Click Apply. A configuration progress dialog box appears, as shown in c.
c. Configuration progress dialog box
 After the configuration process is complete, click Close.
# Configure the monitor port.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP