302
c Sort by the CPU field(default)
d Set the delay interval between screen updates
k Kill a job
l Refresh the screen
n Set the maximum number of threads to display
q Quit the interactive display
t Sort by run time of threads since last restart
< Move sort field to the next left column
> Move sort field to the next right column
Press any key to continue
• Enter d, and then enter a number to modify the refresh interval. If you enter 3, statistics are
refreshed every 3 seconds.
Enter the delay interval between screen updates (1~2147483647): 3
• Enter n, and then enter a number to modify the maximum number of displayed threads. If you
enter 5, statistics for five threads are displayed.
Enter the max number of threads to display(0 means unlimited): 5
84 processes; 107 threads
Thread states: 1 running, 106 sleeping, 0 stopped, 0 zombie
CPU states: 93.26% idle, 0.99% user, 4.23% kernel, 1.49% interrupt
Memory: 755M total, 417M available, page size 4K
JID TID LAST_CPU PRI State HH:MM:SS MAX CPU Name
1176 1176 0 120 R 00:00:02 1 3.71% top
1 1 0 120 S 00:00:06 1 0.92% scmd
866 866 0 120 S 00:00:13 1 0.69% devd
881 881 0 120 S 00:00:10 1 0.69% diagd
720 720 0 115 D 00:00:01 0 0.23% [TMTH]
• Enter k and then enter a JID to kill a thread. If you enter 881, the thread with the JID of 881 is
killed.
Enter the JID to kill: 881
83 processes; 106 threads
Thread states: 1 running, 105 sleeping, 0 stopped, 0 zombie
CPU states: 96.26% idle, 0.54% user, 2.63% kernel, 0.54% interrupt
Memory: 755M total, 418M available, page size 4K
JID TID LAST_CPU PRI State HH:MM:SS MAX CPU Name
1176 1176 0 120 R 00:00:04 1 1.86% top
866 866 0 120 S 00:00:14 1 0.87% devd
1 1 0 120 S 00:00:07 1 0.49% scmd
730 730 0 0 S 00:00:04 1 0.12% [DIBC]
762 762 0 120 S 00:00:22 1 0.12% [MNET]
• Enter q to quit interactive mode.
Table 75 Command output
Field Description
84 processes; 107
threads
Numbers of processes and threads.
JID Job ID of a thread, which never changes.
TID ID of a thread.
To Next Page
Loading...
Need help?
General