EasyManua.ls Logo

Huawei quidway s7700 - Page 327

Huawei quidway s7700
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[CE-Rc] interface vlanif 200
[CE-Rc-Vlanif200] ip address 10.110.10.1 24
[CE-Rc-Vlanif200] pim sm
[CE-Rc-Vlanif200] igmp enable
# Enable PIM-SM on GigabitEthernet 2/0/0.
[CE-Rc] interface gigabitethernet 2/0/0
[CE-Rc-GigabitEthernet2/0/0] port hybrid pvid vlan 210
[CE-Rc-GigabitEthernet2/0/0] port hybrid untagged vlan 210
[CE-Rc-GigabitEthernet2/0/0] quit
[CE-Rc] interface vlanif 210
[CE-Rc-Vlanif210] ip address 10.110.5.2 24
[CE-Rc-Vlanif210] pim sm
# Enable PIM-SM on GigabitEthernet 3/0/0.
[CE-Rc] interface gigabitethernet 3/0/0
[CE-Rc-GigabitEthernet3/0/0] port hybrid pvid vlan 220
[CE-Rc-GigabitEthernet3/0/0] port hybrid untagged vlan 220
[CE-Rc-GigabitEthernet3/0/0] quit
[CE-Rc] interface vlanif 220
[CE-Rc-Vlanif220] ip address 10.110.12.2 24
[CE-Rc-Vlanif220] pim sm
# Configure RIP unicast routing information.
[CE-Rc] rip 2
[CE-Rc-rip-2] network 10.0.0.0
[CE-Rc-rip-2] import-route direct
Step 9 Configure CE-Bc.
# Enable IP multicast routing.
[CE-Bc] multicast routing-enable
# Enable PIM-SM and IGMP on GigabitEthernet 1/0/0.
[CE-Bc] interface gigabitethernet 1/0/0
[CE-Bc-GigabitEthernet1/0/0] port hybrid pvid vlan 230
[CE-Bc-GigabitEthernet1/0/0] port hybrid untagged vlan 230
[CE-Bc-GigabitEthernet1/0/0] quit
[CE-Bc] interface vlanif 230
[CE-Bc-Vlanif230] ip address 10.110.11.1 24
[CE-Bc-Vlanif230] pim sm
[CE-Bc-Vlanif230] igmp enable
# Enable PIM-SM on GigabitEthernet 2/0/0.
[CE-Bc] interface gigabitethernet 2/0/0
[CE-Bc-GigabitEthernet2/0/0] port hybrid pvid vlan 240
[CE-Bc-GigabitEthernet2/0/0] port hybrid untagged vlan 240
[CE-Bc-GigabitEthernet2/0/0] quit
[CE-Bc] interface vlanif 240
[CE-Bc-Vlanif240] ip address 10.110.6.2 24
[CE-Bc-Vlanif240] pim sm
# Configure RIP unicast routing information.
[CE-Bc] rip 3
[CE-Bc-rip-3] network 10.0.0.0
[CE-Bc-rip-3] import-route direct
Step 10 Verify the configuration.
After the preceding configurations, PC1, PC2, and PC3 can receive multicast information from
Source 1; PC4 can receive multicast information from Source 2.
----End
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 8 IPv4 Multicast VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
308

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals