Configuration Files
l Configuration file of PE-A
#
sysname PE-A
#
router id 1.1.1.1
#
multicast routing-enable
#
mpls lsr-id 1.1.1.1
mpls
#
mpls ldp
#
ip vpn-instance RED
route-distinguisher 100:1
vpn-target 100:1 export-extcommunity
vpn-target 100:1 import-extcommunity
#
multicast routing-enable
multicast-domain share-group 239.1.1.1 binding MTunnel 0
multicast-domain switch-group-pool 225.2.2.0 255.255.255.240
#
interface Vlanif40
ip address 192.168.6.1 255.255.255.0
pim sm
mpls
mpls ldp
#
interface Vlanif50
ip address 10.110.1.1 255.255.255.0
pim sm
igmp enable
ip binding vpn-instance RED
#
interface Vlanif60
ip binding vpn-instance RED
ip address 10.110.2.1 255.255.255.0
pim sm
#
interface Eth-Trunk10
service type multicast-tunnel
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 40
port hybrid untagged vlan 40
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 60
port hybrid untagged vlan 60
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
pim sm
#
interface MTunnel0
ip binding vpn-instance RED
ip address 1.1.1.1 255.255.255.255
pim sm
#
bgp 100
group VPN-G internal
peer VPN-G connect-interface LoopBack1
peer 1.1.1.2 as-number 100
Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast 8 IPv4 Multicast VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
309