Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
8141 IOA detected recoverable device error
No action is required. This reference code is logged for information only.
8145 A recoverable I/O processor error occurred. STORIOA
8146 Disk device detected recoverable error FI01105
8150 A permanent I/O processor failure occurred STORIOA
IOP
FI01107
ANYBUS
8151 I/O processor Licensed Internal Code error AJDGP01
STORIOA
8155 to 8156 A permanent I/O processor failure occurred AJDGP01
STORIOA
8200 I/O processor Licensed Internal Code error AJDGP01
IOP
8300 I/O processor card or Licensed Internal Code error
A microprocessor exception occurred on the I/O processor.
STORIOA
IOP
AJDGP01
8301 Not valid condition in I/O Processor Licensed Internal Code
The Licensed Internal Code found a condition that should not have
occurred.
FI01101
AJDGP01
IOP
8400 I/O processor Licensed Internal Code error AJDGP01
9000 to 9001 I/O processor card detected device error FI01105
STORIOA
9002 I/O processor card detected device error
Perform “SDIOP-PIP16” on page 407.
FI01105
STORIOA
FI01140
BACKPLN
FI01106
9008 I/O card does not support functions expected by devices
Perform “SDIOP-PIP25” on page 425.
SVCDOCS
9010 Cache data associated with attached devices cannot be found
Perform “SDIOP-PIP19” on page 415.
SVCDOCS
9011 Cache data belongs to devices other than those attached
Perform “SDIOP-PIP19” on page 415.
SVCDOCS
9012 IOP requires a cache adaptor card but cannot find it.
The cache adapter card is missing or broken.
Perform “SDIOP-PIP29” on page 432.
CACHE
9013 The IOP and attached cache adaptor card are not compatible.
Perform “SDIOP-PIP19” on page 415.
SVCDOCS
9020 to 9021 Array not functional due to present hardware configuration.
Perform “SDIOP-PIP20” on page 417.
SVCDOCS
2749, 2767, 2768, 2842, 2843, 284B
128
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
To Next Page
Loading...
