IBM i 830 User Manual

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
7C03 Resource or storage not available CNGLOAD
FI00730
CNGDTRT
CNGECHO
CNGEORT
CNGPRTY
7C04 Wrong internal routing information FI00730
7C05, 7C09 Error in I/O card Licensed Internal Code FI00730
8011 IOP activation failed.
Modem Country ID parameter in Network Attributes is not set. Use the
CHGNETA command to set MDMCNTRYID value to your country ID.
CNGCONF
8013 IOP activation failed.
Modem Country ID parameter in Network Attributes is not valid for this
adapter. Use the CHGNETA command to change the MDMCNTRYID value
to your country ID.
CNGCONF
8020 System log entry only, no service action required
FFFF User suspected communications problem. UNGUPPR
Asynchronous Communications Failing Items
Notes:
1. To determine the failing items, go to “Failing Items” on page 479.
2. To determine the associated part numbers, go to “Type, Model, and Part
Number list” on page 885.
3. To determine the parts associated with symbolic FRUs, such as “ANYBUS”,or
“DEVTERM”,goto“Symbolic FRUs” on page 495.
Failing Item Description Document Description
AJDG301 Licensed Internal Code Service Functions; APAR or LICTR
CNGASPT ACRSRCNAME value in CRTLINASC
command
Communications Configuration
CNGBCHR BITSCHAR value in CRTLINASC command Communications Configuration
CNGCLBR CALLNBR value in CRTLINASC command Communications Configuration
CNGCMOD CNN value in CRTLINASC command Communications Configuration
CNGCTSV CTSTMR value in CRTLINASC command Communications Configuration
CNGCTYP AUTOANS, AUTODIAL, DIALCMD, SWTCNN,
CNN in CRTLINASC
Communications Configuration
CNGDRTY DIALRTY value in CRTCTLASC command Communications Configuration
CNGDSRT DSRDRPTMR value in the CRTLINASC
command
Communications Configuration
CNGDTRT LINESPEED value in CRTLINASC command Communications Configuration
CNGECHO ECHO value in CRTLINASC command Communications Configuration
CNGEORT EORTBL value in CRTLINASC command Communications Configuration
CNGFLOC FLOWCNTL value in CRTLINASC command Communications Configuration
CNGLBPS LINESPEED, BITSCHAR, PARITY, STOPBITS
values in CRTLINASC
Communications Configuration
B003
Chapter 2. Unit Reference Codes 189

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English